Food waste disposer systems Foshan, Guangdong
OEM / ODM Become a dealer 400-888-0000
GDJIEMEISince 2007
Home/Service & Support
SERVICE & SUPPORT

Fits properly, runs smoothly,
and someone answers when it doesn’t

Installation options, daily use, what to avoid and the questions we hear most — we try to solve support issues inside the manual.

INSTALLATION

Three outlet connections,
three sink conditions

Spring-clip flexible

A retaining spring locks the hose connector, giving generous installation tolerance where the sink outlet and drain pipe are slightly misaligned. Used on E360 / L9 series.

Threaded rigid

A threaded rigid connection for excellent sealing and a solid structure — ideal for standardised new kitchens. Used on M / G / H / J series.

Clamp-plate flexible

A clamp plate holds the hose for easy fitting and removal — best for retrofits and rental property. Used on P / F1 / HSJ / JMD series.

Before installation, confirm the sink outlet size, the space available under the counter (including the power socket position) and the drainage route. For older pipework, we recommend a drain inspection first.

HOW TO USE

Five steps, thirty seconds

The right order is water first, then waste, then power. Water is the only transport for ground residue.

Turn on cold water

Open the tap first and keep a medium flow running.

Feed the waste

Add leftovers, vegetable trimmings and peel in batches.

Switch on

Press the air switch or the wireless remote to start grinding.

Grind 15–30 s

When the sound lightens and there is no knocking, the load is cleared.

Switch off, rinse 15 s

Stop the machine first, keep the water running to flush, then close the tap.

DO & DON’T

What it handles,
and what not to force

✓ Good to grind

  • Leftovers, vegetable trimmings, peel and fruit stones
  • Small to medium bones — fish, chicken
  • Eggshells, nut shells, tea leaves and coffee grounds
  • Bread, noodles and other starches (in batches)

✕ Avoid

  • Shells and large marrow bones — very hard or very tough
  • Hot oil or large volumes of fat (it sets inside the pipe)
  • Metal, plastic, glass, rubber or any non-food waste
  • Whole bundles of long fibres (cut short and feed in batches)

If the unit will be unused for a long period, isolate the power and keep the chamber dry. If odours appear, grind lemon peel or bicarbonate of soda with running water for a few tens of seconds.

FAQ

Questions we get asked

Not answered here? Talk to our technical support directly.

Contact technical support
Everyday leftovers, vegetable trimmings and peel, eggshells, fish and chicken bones, nut shells, tea leaves and coffee grounds are all fine. Keep hard items such as bones and shells small to medium, and cut long fibres short before feeding them in batches.
Jiemei uses a scissor-type secondary cutting plate: long fibres are cut again into short segments after secondary grinding and carried out with the water flow, which prevents wrapping and sediment. Where older cast-iron pipework has a small bore, inspect the drain before installation.
Models with auto-reverse handle it themselves: up to six millisecond-level torque boosts, then reverse rotation. If a foreign object has locked the plate, use the hex key fixed to the power cord — insert it into the port at the base and turn in reverse to clear it, with no dismantling.
AC models stay below 60 dB, DC models below 65 dB. A rubber joint at the waist of the upper chamber absorbs vibration, so an imperfectly level countertop does not amplify resonance — measured reduction is a further 3–5 dB.
Three checks: whether the sink outlet matches the flange, whether there is enough under-counter height for the body (slim models go down to Φ140), and whether a power socket is available. If an air switch is to be drilled into the countertop, confirm its position as well.
A single use typically runs from ten-odd seconds to under a minute, so cumulative consumption is small. The unit also powers off automatically after 15 minutes without operation, avoiding long idle running.
Warranty term and scope follow the card supplied with the unit and the contract between the parties; project and OEM programmes can agree separate terms. We supply spare parts and technical support, with regional service handled by local stores or service partners.
Yes. OEM / ODM is available: housing colour, body label artwork and content, nameplate, remote switch and packaging can all be customised to order, with UL / CE / CQC certification completed for the target market.
AFTER SALES

When something goes wrong,
we would rather you reached a person

Technical support

Installation guidance, specification confirmation and initial fault diagnosis; on-site support available for project customers.

Spare parts

Cutter plates, flanges, flexible joints and switches are stocked long term, so a whole unit rarely needs replacing.

Regional service

Installation and repair handled by local stores and service partners, covering Shanghai, Kunming, Guiyang, Hefei, Yancheng, Ruian, Xi’an and more.

SUPPORT

Need an installation manual?

Leave your details and we will send the installation drawings, cut-out dimensions and user instructions for the model you need.